Scootopia Lambretta Bearings – A Proven Range for Lambretta Engine Rebuilds
Proven Over Many Years
Scootopia bearings have been available for over 10 years and have been sold throughout the Lambretta market during this time.
From our own experience, they have proved to be a good-quality, affordable option for Lambretta engine rebuilds, with no known issues.
The range includes a selection of bearings for the crankshaft, gearbox and rear hub, making them a useful choice when rebuilding, servicing or replacing worn components on your Lambretta.
Whether you're rebuilding a complete engine, replacing worn bearings or carrying out general maintenance, choosing the correct bearing for your setup is essential.
The Scootopia Lambretta Bearing Range
The Scootopia range includes a selection of bearings covering some of the key applications within the Lambretta engine, gearbox and rear hub assemblies.
NU205 – Brass-Caged Flywheel Bearing
The NU205 is a brass-caged flywheel bearing used on Lambretta models fitted with LI, SX, TV and original GP/DL 125 & 150 crankshafts.
This bearing is suitable for the corresponding crankshaft applications and is a commonly used option when rebuilding these Lambretta engines.
Applications:
-
LI crankshafts
-
SX crankshafts
-
TV crankshafts
-
Original GP/DL 125 & 150 crankshafts
NU2205 – Brass-Caged Flywheel Bearing
The NU2205 is also a brass-caged flywheel bearing, but it is the wider version of the NU205.
Originally used on GP/DL 200 models, this is the bearing required when fitting a DL/GP crankshaft. If you are fitting a DL/GP crank into another Lambretta engine, the NU2205 is the bearing required for this application.
The main difference between the NU205 and NU2205 is the width, making it important to select the correct bearing for the crankshaft being used.
6305 – Drive-Side Crankshaft Bearing
The 6305 bearing is fitted on the opposite side of the crankshaft to the flywheel. This is known as the drive-side bearing.
Used across the Lambretta LI, SX, TV, DL and GP models, the 6305 supports the crankshaft on the drive side of the engine.
Suitable for:
-
Lambretta LI
-
Lambretta SX
-
Lambretta TV
-
Lambretta DL
-
Lambretta GP
6004 – Gearbox Bearing
The 6004 bearing is used within the Lambretta gearbox and is fitted to the gearbox endplate.
Used across LI, SX, TV, DL and GP models, it is an important component when servicing, repairing or rebuilding the gearbox.
Suitable for:
-
Lambretta LI
-
Lambretta SX
-
Lambretta TV
-
Lambretta DL
-
Lambretta GP
Rear Hub Bearing
The Scootopia rear hub bearing is used across Lambretta LI, SX, TV, DL and GP models and is designed specifically for Lambretta applications.
From our experience, it offers good quality at a very competitive price and has had no known issues.
Unlike some bearings available on the market which use a plastic cage, the Scootopia rear hub bearing features a metal cage.
Suitable for:
-
Lambretta LI
-
Lambretta SX
-
Lambretta TV
-
Lambretta DL
-
Lambretta GP
Fitting note: When fitted, a small amount of the bearing should sit proud of the engine casing. The bearing should not be fitted completely flush with the casing.
Layshaft Needle Bearing Set
The layshaft needle bearing sits on the end of the layshaft within the Lambretta gearbox.
The Scootopia kit comes complete with its shim and bearing track, making it a convenient option when rebuilding or servicing the gearbox.
Suitable for Lambretta LI, SX, TV, DL and GP models.
Kit includes:
-
Needle bearing
-
Shim
-
Bearing track
Gear Cluster Needle Bearing Set
The gear cluster needle bearing sits within the Lambretta gearbox and is used across LI, SX, TV, DL and GP models.
The Scootopia set comes complete with its bearing track and shim, making it a useful kit when rebuilding the gearbox or replacing worn bearing components.
Kit includes:
-
Gear cluster needle bearing
-
Bearing track
-
Shim
Suitable for:
-
Lambretta LI
-
Lambretta SX
-
Lambretta TV
-
Lambretta DL
-
Lambretta GP
Choosing the Correct Bearing for Your Lambretta
When rebuilding a Lambretta engine, it is important to select the correct bearing for the crankshaft and engine configuration.
This is particularly important when using different crankshafts, such as fitting a DL/GP crankshaft into another model.
The difference between the NU205 and NU2205, for example, is important to understand, as the NU2205 is the wider bearing required for the DL/GP crankshaft application.
Always check your crankshaft, engine specification and existing components before ordering to ensure you select the correct bearing for your setup.
Quality and Value
We have always found Scootopia bearings to offer good quality at a very competitive price.
They have been available for many years and, from our experience, have proved to be a good option for Lambretta engine rebuilds.
Whether you're rebuilding a standard engine, replacing worn components or carrying out routine maintenance, the Scootopia bearing range offers a good balance of quality and value for money.
Scootopia Bearings for Your Lambretta
From flywheel and drive-side crankshaft bearings to gearbox needle bearing sets and rear hub bearings, the Scootopia range covers a number of the essential bearing requirements when rebuilding or servicing a Lambretta.
With many years on the market, good quality and competitive pricing, Scootopia bearings are worth considering for your next Lambretta engine rebuild.
Explore the Scootopia Lambretta bearing range at Scooter Vista.
