Welcome to the Scooter Vista range of Lambretta Cables & Control Parts for LI, SX, TV, DL and GP models.
Whether you're replacing a single worn cable, fitting a complete cable set during a restoration or rebuilding the controls on your Lambretta, we stock a wide range of Lambretta clutch, throttle, gear, brake and choke cables, together with the adjusters, trunnions, cable blocks, top hats, clamps and other components needed to correctly operate your scooter.
Our range covers popular Lambretta models including:
- Lambretta LI
- Lambretta LI Special
- Lambretta TV
- Lambretta SX
- Lambretta DL
- Lambretta GP
- Series 1, Series 2 and Series 3 models where applicable
From standard replacement cables and complete cable sets to friction-free and PE-lined cable systems, our range is suitable for restorations, servicing, everyday riding and performance Lambrettas.
Always check the exact model, series, cable length and control arrangement before ordering, as Lambretta cable specifications can differ between models.
Lambretta Cable Sets
A complete Lambretta cable set is an excellent option when rebuilding a scooter or replacing several old cables at once.
A typical cable set can include:
- Throttle cable
- Clutch cable
- Front brake cable
- Rear brake cable
- Gear cables
- Choke cable
The exact contents depend on the model and cable set specification.
Complete cable sets are available for LI, SX, TV, DL and GP applications, with different versions available for Series 3 and GP/DL scooters.
Replacing the complete set can be preferable on an older scooter where the existing cables have become stiff, rusty or damaged.
Lambretta Clutch Cables
The clutch cable connects the clutch lever at the headset to the clutch operating arm on the engine.
A correctly fitted clutch cable should allow smooth operation without excessive friction.
Common signs of a worn or damaged clutch cable include:
- Heavy clutch lever
- Frayed inner cable
- Stiff operation
- Cable sticking
- Excessive clutch lever movement
- Difficulty selecting neutral
- Difficulty changing gear
Scooter Vista stocks Lambretta clutch cables, clutch cable inners and related components for suitable applications.
When replacing a clutch cable, inspect the cable routing and adjuster at the same time.
Lambretta Throttle Cables
The throttle cable connects the twistgrip to the carburettor throttle slide or throttle mechanism.
A throttle cable needs to move freely and return correctly when the throttle is released.
Check for:
- Fraying
- Kinks
- Corrosion
- Stiff movement
- Damaged outer casing
- Incorrect cable length
- Poor routing
Complete replacement throttle cables are available in standard and longer lengths for different Lambretta applications.
If fitting a larger carburettor or modifying the routing of the cable, an extra-long throttle cable may sometimes be required.
Lambretta Gear Cables
Lambretta gear cables operate the gear selector mechanism from the twistgrip gear control.
Most later Lambrettas use two gear cables to operate the selector mechanism.
The cables need to be correctly routed, adjusted and secured to provide accurate gear selection.
Worn or incorrectly adjusted gear cables can cause:
- Difficulty selecting gears
- Excessive movement
- Difficulty finding neutral
- Gears jumping out
- Stiff gear selection
- Incorrect gear positions
Complete gear cables and replacement inner cables are available for different Lambretta applications.
Lambretta Gear Cable Inner Cables
If the existing outer cable is in good condition, it may be possible to replace just the inner cable.
This can be useful during routine servicing or when the inner has become frayed or damaged.
Replacement gear cable inners are available for standard applications, as well as specific GP/DL versions.
Before replacing an inner cable, check that the outer is not damaged, crushed or excessively corroded.
A new inner running through a badly damaged outer will not necessarily provide smooth operation.
Lambretta Front Brake Cables
The front brake cable connects the front brake lever to the front brake mechanism.
Because the front brake is an important safety component, the cable should be inspected regularly.
Check for:
- Fraying
- Kinks
- Corrosion
- Damaged outer
- Excessive play
- Incorrect routing
- Poor adjustment
Replacement front brake cables and inner cables are available for suitable Lambretta models.
Always make sure the front brake operates smoothly and returns correctly after fitting a new cable.
Lambretta Rear Brake Cables
The rear brake cable connects the foot-operated rear brake pedal to the rear brake mechanism.
Scooter Vista stocks Lambretta rear brake cables and associated fittings for suitable applications.
A rear brake cable can become stiff or corroded over time, particularly if water and dirt have entered the outer casing.
When replacing the cable, check:
- Cable routing
- Cable clamp
- Rear brake top hat
- Cable adjuster
- Cable inner
- Rear brake arm
- Brake return spring
Replacement rear brake top hats are available for LD, LI, SX, TV, DL and GP applications.
Lambretta Choke Cables
The choke cable operates the carburettor's cold-start mechanism.
A damaged or poorly adjusted choke cable can make starting more difficult.
Check the choke cable for:
- Fraying
- Stiff movement
- Incorrect routing
- Excessive play
- Damaged outer
- Incorrect length
Replacement Series 3 choke cables are available for suitable Lambretta applications.
Make sure the choke mechanism fully opens and closes when the lever is operated.
Lambretta Cable Adjusters
Cable adjusters allow the correct amount of free play to be set at the cable.
Adjusters are commonly used on:
- Clutch cable
- Gear cables
- Brake cables
- Other control cables
A damaged adjuster can make correct cable adjustment difficult.
Scooter Vista stocks Lambretta cable adjusters and cable adjuster blocks for suitable LI, SX, TV, DL and GP applications. Specialist suppliers list stainless-steel adjusters specifically for clutch and gear cables.
Lambretta Cable Blocks
The cable block provides the mounting and adjustment point for the clutch and gear cables.
When rebuilding a Lambretta, inspect the cable block for:
- Cracks
- Damaged threads
- Worn cable holes
- Corrosion
- Incorrect previous repairs
Replacement cable blocks are available for LI, SX, TV, DL and GP models.
A good-quality cable block helps ensure the cables remain correctly positioned and can be accurately adjusted.
Lambretta Cable Trunnions
Cable trunnions connect the cable inner to the control mechanism.
They are small components but are essential for transferring the movement of the cable to the clutch, brake or other control.
Worn, damaged or incorrectly sized trunnions can result in excessive movement or poor adjustment.
When rebuilding a Lambretta, check the condition of all cable trunnions before reusing them.
Lambretta Cable Top Hats
Cable top hats provide the correct seating point for cable outers at various locations around the scooter.
They can be found on components including brake and control cable arrangements.
A missing or damaged top hat can prevent the cable from sitting correctly and may alter the amount of available adjustment.
Replacement Lambretta cable top hats are available for different applications, including rear brake and front brake arrangements.
Lambretta Cable Clamps
Cable clamps secure the cable outer in the correct position.
Correct cable routing is important because excessive movement or sharp bends can increase friction and affect control operation.
Original-style cable clamps are available for Series 3 Lambrettas and can be particularly useful during a restoration where maintaining the correct factory appearance is important.
Lambretta Cable Gaitors
Cable gaitors protect the exposed section of cable inner where the cable exits the outer casing.
They help keep dirt and moisture away from the cable and can extend cable life.
Gaitors are commonly used on:
- Clutch cables
- Gear cables
- Rear brake cables
Replacement cable gaitors and complete gaitor sets are available for Lambretta applications.
Lambretta Friction-Free Cables
Modern friction-free cables are a popular upgrade for riders looking for smoother control operation.
PE-lined or similar low-friction cable outers can reduce friction between the inner cable and outer casing.
High-quality cable sets can also use stainless-steel inner cables and different strand constructions for flexibility and durability.
The benefits can include:
- Smoother operation
- Reduced friction
- Improved throttle response
- Lighter clutch operation
- Easier gear selection
- Longer cable life
This can be particularly noticeable on scooters with long cable runs or modified control arrangements.
Lambretta Cable Routing
Correct cable routing is extremely important.
A perfectly good cable can feel stiff or operate incorrectly if it is routed incorrectly.
When installing cables:
- Follow the correct route through the frame.
- Avoid sharp bends.
- Avoid trapping cables under bodywork.
- Keep cables away from hot engine components.
- Make sure the cables have sufficient movement when the handlebars are turned.
- Check that the cable outers are seated correctly.
- Adjust the cables only after they have been correctly routed.
When the handlebars are turned fully left and right, the cables should not become tight or pull on the controls.
Lambretta Cable Adjustment
Once the cables are installed, they need to be correctly adjusted.
The amount of free play required depends on the individual control.
The important thing is that the control operates fully while still allowing the mechanism to return correctly.
For example:
Clutch
The clutch needs sufficient free play to prevent the clutch from being partially engaged.
Throttle
The throttle should return freely when released.
Brakes
The brake controls need to operate the brake correctly without excessive free play.
Gears
Both gear cables need to be adjusted together so the selector positions correspond correctly with the gear positions.
Lambretta Gear Cable Adjustment
Gear cable adjustment is particularly important because two cables work together to control the gear selector.
If one cable is adjusted incorrectly, the gear positions can become difficult to select.
When adjusting:
- Check the selector is in the correct position.
- Make sure both cables are correctly seated.
- Adjust the cables evenly.
- Check all gear positions.
- Check neutral.
- Confirm the twistgrip markings correspond with the selected gears.
- Ensure the cables are not excessively tight.
After adjustment, rotate the handlebars from lock to lock and make sure the cables remain free.
Lambretta Clutch Cable Adjustment
The clutch cable should be adjusted so that the lever has the correct amount of free movement while allowing the clutch to fully disengage when the lever is pulled.
If the cable is too tight, the clutch may not fully engage.
If it is too loose, the clutch may not fully disengage.
After adjustment, check:
- Lever free play
- Clutch operation
- Gear selection
- Neutral selection
- Cable routing
Lambretta Throttle Cable Adjustment
The throttle should operate smoothly from closed to fully open.
After fitting a new throttle cable:
- Check the throttle returns freely.
- Turn the handlebars fully left.
- Turn them fully right.
- Check the throttle does not open as the bars move.
- Check the carburettor throttle slide closes fully.
- Set the required free play.
- Recheck after the engine has been started.
Never assume a throttle cable is correctly adjusted simply because it fits.
Lambretta Brake Cable Adjustment
Both front and rear brake cables should be correctly adjusted to provide effective braking without excessive free play.
After fitting a brake cable, check:
- Cable seating
- Cable routing
- Brake arm movement
- Return spring
- Lever or pedal movement
- Brake operation
The brake should apply progressively and release correctly when the control is released.
Lambretta Cable Spares
Carrying a few spare cable components can be useful when touring or travelling on a classic scooter.
A cable spares kit can include items such as:
- Gear inner
- Clutch inner
- Front brake inner
- Universal throttle cable
- Cable nipples or trunnions
Specialist Lambretta cable spares kits are available specifically for roadside repairs.
For riders undertaking long-distance touring, carrying suitable cable spares can be worthwhile.
Lambretta Cables for Restoration
If you're rebuilding a Lambretta from the frame up, fitting new cables is normally worthwhile.
Even if the original cables appear usable, inspect them carefully for:
- Rust
- Fraying
- Stiffness
- Damaged outers
- Incorrect lengths
- Previous repairs
- Poor routing
New cables can make a noticeable difference to the finished scooter.
A complete cable set also allows all of the controls to be installed and adjusted together.
Lambretta Cable Sets – Original or Modern?
There are several options when choosing a Lambretta cable set.
Original-style cables
Ideal for restorations where appearance and originality are important.
Friction-free cables
Designed to provide smoother operation and reduced friction.
PE-lined cables
A modern cable construction designed to improve cable movement.
Longer cables
Useful for modified scooters where standard cable lengths may not be suitable.
Specialist cable sets are available in different colours and specifications, including original-style grey and black cables as well as modern PE-lined versions.
Choosing the Correct Lambretta Cable
Before ordering a replacement cable, check:
Lambretta model
Series
Model year where relevant
Cable type
Cable length
Inner cable specification
Outer cable specification
Nipple/trunnion type
Standard or modified scooter
Original or friction-free cable
This is particularly important because LI/SX/TV and DL/GP scooters can use different cable specifications.
For example, specialist suppliers list separate LI/SX and GP clutch cable applications, as well as different gear cable inners for standard and GP/DL scooters.
Genuine & Specialist Lambretta Cable Parts
At Scooter Vista, we stock a mixture of quality replacement, restoration and performance cable components for classic Lambrettas.
Our range covers everything from complete cable sets to individual cable inners, adjusters, trunnions and small control fittings.
Where applicable, individual product descriptions provide information about:
- Model compatibility
- Series
- Cable length
- Cable type
- Manufacturer
- Original part number
- Intended application
This makes it easier to select the correct cable or control component for your Lambretta.
Need Help Finding the Correct Lambretta Cable?
Classic Lambretta cables are not necessarily interchangeable between every model.
Before ordering, check your:
- Lambretta model
- Series
- Year
- Cable type
- Existing cable
- Cable length
- Control arrangement
- Original part number where available
If you're unsure which cable or control component you need, check the individual product description or contact Scooter Vista for assistance.
Scooter Vista – Lambretta & Vespa Parts Specialists
Scooter Vista specialises in classic Lambretta and Vespa parts, supplying components for restoration, servicing, engine rebuilding and performance upgrades.
From a replacement clutch or throttle cable to a complete friction-free cable set, our range of Lambretta Cables & Control Parts for LI, SX, TV, DL & GP models is designed to help keep your scooter's controls operating smoothly and correctly.
Browse the products below to find the correct Lambretta clutch, throttle, gear, brake, choke cables, cable adjusters, trunnions, cable blocks, top hats and control components for your scooter.
